1/8" Rope Tie-Down
S Hook Part Number: 00040 Snap Hook Part Number: 00039
The 1/8" Loadmaster Tie-Down was developed and initially manufactured for the Navy Expeditionary Command. This product can accommodate any length of rope 1/8" - 3/16" in diameter or 550 or 650 parachute cord. The adjustable length rope doesn't have the stretch of elastic. That combined with the self locking pulley mechanism make this tie-down a safe and secure alternative to bungee cords. It can be used for tent lines, tarps, car trunks, tree stakes, roof or bicycle racks, and many other uses.
The 1/8" Loadmaster Tie-Down comes with two rubber coated hooks to protect paint finish and prevent scratching. The maximum working load limit is 150 lbs (S hook) or 300 lbs (Snap hook).
To Use: Attach both hooks to secure anchor points and pull loose end of rope to tighten. To release, pull loose end of rope while lifting release lever to relieve tension on rope.
Available for purchase on Amazon.com
1/8" snap hook available here: https://www.amazon.com/550-Paracord-Military-Quickie-Tie-down/dp/B00O5JKJ8U/ref=sr_1_8?dchild=1&keywords=quickie+tie+down&qid=1613323301&sr=8-8
1/8" S hook available here: https://www.amazon.com/Quickie-Rope-Tie-down-Working-Limit/dp/B00O2IYABG/ref=sr_1_9?dchild=1&keywords=quickie+tie+down&qid=1613326144&sr=8-9
1/4" Tie-Down
1/4" Original Tie-Down Part: 96214 1/4" Ratchet Tie-Down Part: 00051
Quickie Tie-Down is proud to offer the only the only rope tie-down on the market that is military approved and has multiple National Stock Numbers (NSNs). Our tie-downs have been used on truck beds, tanks, Oshkosh, HMMWV, tarps, containers, hammocks, munitions, and to secure helicopter rotors and covers.
The tie-down includes 12ft rope pre-installed and can accommodate any length of 1/4" diameter rope. The 1/4" Loadmaster Original Tie-Down and 1/4" Loadmaster Ratchet Tie-Down come with two rubber coated S hooks to protect paint finish.
The 1/4" Loadmaster Ratchet Tie-Down has four convenient ways of tensioning the rope: pull the loose end of the rope like the Original Tie-Down series, using a socket wrench in the socket drive on either side of the hub, or using the built-in ratchet handle feature. Because the rope can be tensioned on three sides of the tie-down, not having access to the tensioning mechanism will be a problem of the past.
The tie-down has a working load limit of 150 lbs (Original) or 225 lbs (Ratchet). To use: attach both hooks to secure anchor points and pull loose end of rope to tighten. To release, pull loose end of rope while engaging release lever to relieve tension on rope.
Available for purchase on Amazon.com
1/4" Original Tie-Down available here: https://www.amazon.com/Original-Quickie-Tie-down-Working-Limit/dp/B00O4J3CLW/ref=sr_1_5?dchild=1&keywords=1%2F4+quickie+tie+down&qid=1613329664&sr=8-5
1/4" Ratchet Tie-Down available here: https://www.amazon.com/Ratcheting-Quickie-Tie-down-Working-Limit/dp/B00O842BTM/ref=sr_1_3?dchild=1&keywords=1%2F4+quickie+tie+down&qid=1613329978&sr=8-3
3/8" Tie-Down
3/8" Original Tie-Down Part Number: 07838 3/8" Ratchet Tie-Down Part Number: 00052
Quickie Tie-Down is proud to offer the only the only rope tie-down on the market that is military approved and has multiple National Stock Numbers (NSNs). Our tie-downs have been used on truck beds, tanks, Oshkosh, HMMWV, tarps, containers, hammocks, munitions, and to secure helicopter rotors and covers.
The tie-down includes 12ft rope pre-installed and can accommodate any length of 3/8" diameter rope. The 3/8" Loadmaster Original Tie-Down and 3/8" Loadmaster Ratchet Tie-Down come with two rubber coated S hooks to protect paint finish.
The 3/8" Loadmaster Ratchet Tie-Down has four convenient ways of tensioning the rope: pull the loose end of the rope like the Original Tie-Down series, using a socket wrench in the socket drive on either side of the hub, or using the built-in ratchet handle feature. Because the rope can be tensioned on three sides of the tie-down, not having access to the tensioning mechanism will be a problem of the past.
The tie-down has a working load limit of 500 lbs (Original) or 650 lbs (Ratchet). To use: attach both hooks to secure anchor points and pull loose end of rope to tighten. To release, pull loose end of rope while engaging release lever to relieve tension on rope.
Available for purchase on Amazon.com
3/8" Original Tie-Down available here: https://www.amazon.com/Original-Quickie-Tie-down-Working-Limit/dp/B00O5DCDJ4/ref=sr_1_3?dchild=1&keywords=3%2F8+quickie+tie+down&qid=1613331049&sr=8-3
3/8" Ratchet Tie-Down available here: https://www.amazon.com/Ratcheting-Quickie-Tie-down-650lbs-Working/dp/B00O85AQGG/ref=sr_1_5?dchild=1&keywords=3%2F8+quickie+tie+down&qid=1613331333&sr=8-5
3/8" Marine Tie-Down
Part Number: 00134
The Marine Tie-Down is completely unique in the rope tie-down industry in that it is a corrosion resistant rope tie-down that locks the rope in place when the aluminum ratchet handle is in the lock position, preventing any further movement of the rope until it is released. The Marine Tie-Down can use most types of rope in a 3/8" diameter such as: ski rope, mountain climbing rope, polyester, polyproplene, nylon, core rope, protected jacketed rope, among others. It has a molded guard to protect the pawl plate within the body. The handle is available in aluminum or glass-filled nylon versions (special orders only).
QTD Sidedrive
Part Number: 00025
Coming Soon
The QTD Sidedrive works similar to a webbing ratchet. Instead of pulling the rope in continuous motion like the 3/8" Ratchet, you pull the slack out of the rope similar to a webbing tie-down from the side of the unit until the slack is removed. Once you've done that rotate the handle until the remaining rope winds up once around the wheel and tensions the rope within the wheel. The rope must complete 1.5 revolutions around the wheel for optimal operation. It is a smaller version of our Air Force 37.5k lbs ratchet and has a working load limit of 1,500 lbs.
Universal Tie-Down
Part Number: 00023
Coming Soon
The Universal Tie-Down is a larger version of the 1/8" Tie-Down and is named Universal because it can accommodate any diameter of rope from 1/4" to 5/8". It can be used on tarps, tents, use as a hoist, atvs, motorcycles etc. The working load limit is based on the limit of the rope used. The tie-down comes with two rubber coated S hooks to protect paint finish and prevent scratching.
Shelter Net Tie-Down
Single Barrel Part Number: 00020 Double Barrel Part Number: 00106
The Shelter Net Tie-Down unit was designed to replace the dog bone for a rapid deployment equipment and mobile tactical shelters used by the U.S. military and FEMA to enhance mobilization. It is made of a glass-filled nylon and is shaped to fit in the grooves of your hand making it a true hand grip tie-down. We combined proven technologies with practical expertise to create this innovative new product.
The Shelter Net Tie-Down is available with a single barrel or double barrel to suit any need and can even be modified to become a traditional tie-down with over 1,000 lbs. of holding capacity!
The Shelter Net Tie-Down can hold any rope with a diameter of 5/16" to 3/8".
The maximum load limit is 1,280 lbs.